Power Supply Units

Showing products 10 of 669

View

Mean Well MSP-1000-48 AC/DC PSU module (+ enclosure) 21 A 1008 W 56 V DC

Universal input · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, overvoltage, overheating · Parallel function (3+1) · Low idle power when using remote signal · Switching on and off of the output voltage via remote signal · Sensor connection for correct voltage at the load · DC-OK signal ·...View more

Thalheimer ERT 230/230/1G, 230VA Medical Grade Isolation Transformer, 230Vac, EN 60601-1, IP20

Safety isolating transformer that conforms to EN 60601-1 and is suitable for medical equipment (According to the Medical Products Law). Ideal for adhering to the galvanic separation of medical equipments from the mains supply as required by the Medical Products Law. The device is equipped with a switch-on current limit and robust steel-plate casing.View more

WAGO 787-1640 Rail mounted PSU (DIN) 24 V 10 A 240 W 1 x

Primary-switched power supply, 3-phase with TopBoost secondary safety with circuit breakers. Encapsulated for the control cabinet installation.This text is machine translated.View more

Block PVSE 400/24-20 Rail mounted PSU (DIN) 24 V DC 20 A 38.4 W 1 x

Three phase primary switched mode power supply from Block’s Economy PVSE 400 PowerVision series. With massive power reserves focussing on the key task of power supply.ApprovalsUL/CSA 60950 recognised (E213214), UL508 listed (E219022)View more

VOLTCRAFT SPS 1525 PFC Bench PSU (adjustable voltage) 3 – 15 V DC 2 – 25 A 375 W Remote No. of outputs 1 x

The high-performance power supply is primarily clocked and therefore very compact. The output voltage can be adjusted to steady bottom of the device to 13.8 V. An unintentional adjustment is prevented.This text is machine translated.View more

TracoPower TSP 180-124WR Rail mounted PSU (DIN) 24 V DC 7.5 A 180 W 1 x

TSP 180-124WR industrial power supply with 24V DC 7.5A 180W output – from TracoPower’s TSP-WR extension range of high power DIN rail power supplies with ultrawide input range.With this input voltages the power supplies can be used in almost all single- and 3 phase power networks worldwide. A high, continuously available power reserve guarantees reliable...View more

FG Elektronik CVV-100-24 AC/DC PSU module 3.75 A 90 W 24 V DC-to-DC converter, Adjustable power output

Adjustable voltage source with downstream DC/DC converter developed by FG for precise control of the output voltage – depending on the version by means of 0-10-V control voltage or 10-kΩ potentiometer. The voltage sources are available in four power classes from 90 to 180 W with a typical maximum output voltage of 12 V or...View more

FG Elektronik CPV-100-12 AC/DC PSU module 7.50 A 90 W 12 V Adjustable power output, DC-to-DC converter

Adjustable voltage source with downstream DC/DC converter developed by FG for precise control of the output voltage – depending on the version by means of 0-10-V control voltage or 10-kΩ potentiometer. The voltage sources are available in four power classes from 90 to 180 W with a typical maximum output voltage of 12 V or...View more

Phoenix Contact QUINT-PS/24DC/12DC/ 8 Rail mounted PSU (DIN) 12 V DC 8 A 1 x

DIN rail power supply for DC application. Ideal for voltage stabilisation on long cable runs. The voltage at the output can be adjusted.View more

Siemens SITOP PSU8200 24 V/20 A Rail mounted PSU (DIN) 24 V DC 20 A 480 W 1 x

The 3-phase base unit with 20 A, has been innovated and is only 70 mm wide for the most compact tests in this performance . An indication contact for evaluating the operational status is now built and the input voltage area was expanded to 320 – 575 Vac. With up to 93 effectiveness of the...View more

1 26 27 28 29 30 67