Showing products 9 of 19

Sort By
View

Aim TTi EX752M Bench PSU (adjustable voltage) 0 – 150 V DC 0 – 2 A 300 W No. of outputs 2 x

No. of outputs 2 x; – Output 1; – Output 1; 300 W; High output voltage, 2 × 75 V/DC or 1 × 150 V/DC; Combined billing increments and linear circuit; Series or parallel connection via the operating switch; Lowest weightView more

Aim TTi TSX3510 Bench PSU (adjustable voltage) 0 – 35 V DC 0 – 10 A 360 W No. of outputs 1 x

Desktop power supplies with output higher than 350W in a compact, lightweight case. Available with analogue control or with digital control and comprehensive busprogrammierung as well as with 2 output combinations.This text is machine translated.View more

Aim TTi CPX400S Bench PSU (adjustable voltage) 0 – 60 V DC 0 – 20 A 420 W No. of outputs 1 x

The CPX400S is a version with simple output of the very popular series CPX400 Power Flex power supply units with 2-fold-output. Available in three versions: only manual control (CPX 400 S), with insulated analogue remote control (CPX400 SA) or with a complete range of digital bus interfaces (CPX 400 SP). The ultra-compact design takes up...View more

Aim TTi CPX200D Bench PSU (adjustable voltage) 0 – 60 V DC 0 – 10 A 360 W No. of outputs 2 x

No. of outputs 2 x; – Output 1; – Output 1; 360 W; ; Large, through the maximum performance limited voltage and current range; Separate displays for current and voltage; Sensor cable (sense); Surge protection OVP; By means of secondary switch can be switched on and off the channels separatelyView more

Aim TTi PL303QMD-P Bench PSU (adjustable voltage) 0 – 30 V DC 0 – 3 A 180 W No. of outputs 2 x

No. of outputs 2 x; – Output 1; – Output 1; 180 W; ; Linear control, low ripple and low noise; ; The adjustable voltage range can within the entire area, “V-span””, to be limited; ; Can be controlled via RS232 and USB (PL_P-model); ; Can be used in networks, TCP/IP, ICMP (PL_P-model); ; Lockable...View more

Aim TTi MX180T Bench PSU (adjustable voltage) 0 – 120 V 0 – 3 A 18 W, 180 W No. of outputs 3 x

The MX 180 T has two outputs with a performance of each 0 to 30 V at 0 to 6 A as well as a third output with an output of 0 to 5.5 V at 0 to 3 A. Each output has simultaneous measurement with high resolution, switchable remote scanning and an individual output...View more

Aim TTi MX100TP Bench PSU (adjustable voltage) 0 – 35 V DC 0 – 6 A No. of outputs 3 x

The MX100TP is a 315 W power supply with high precision for laboratories with three full-fledged outputs, each of which has several areas. The MX100 TP-power supply has a large graphic LCD with backlight, on the complete settings for all three outputs can be displayed at the same time, as well as a quick and...View more

Aim TTi CPX400D Bench PSU (adjustable voltage) 0 – 60 V DC 0 – 20 A 840 W No. of outputs 2 x

The power supplies with two outputs CPX 400 D and CPX 400 DP have a power flex control, with the higher currents at low voltages within a power envelope can be generated. You have intelligent analogue controls with setting block and an isolated voltage tracking for a simple serial or parallel wiring. The CPX 400...View more

Aim TTi CPX400DP Bench PSU (adjustable voltage) 0 – 60 V DC 0 – 20 A 840 W GPIB, LAN, LXI, RS232, USB No. of outputs 2 x

The power supplies with two outputs CPX 400 D and CPX 400 DP have a power flex control, with the higher currents at low voltages within a power envelope can be generated. You have intelligent analogue controls with setting block and an isolated voltage tracking for a simple serial or parallel wiring. The CPX 400...View more