Electronics learning kit JoyPi Joy-it

Joy-IT has developed a comprehensive education solution with the joy-pi and its many years of experience from the manufacturing of Open Source Electronics.The Joy-Pi is an experimental case based on the Raspberry Pi and is ideally suited for the entry in to electronics and programming. The well thought out case system offers here a perfect all-in-One environment and puts an end to the many fummeligen small partial solutions and cable chaos on the work table.The Joy-Pi also for school projects is very good, as it at the end of the hour simply switch off and then close it can, and then in the next hour in the project. Another advantage of the case is the great mobility and compactness. In this way, you can use it without much effort, with you wherever you go and explore the universe of the Raspberry Pi together with friends.The Joy-Pi has a multitude of sensors and modules, which, thanks to the very detailed examples of use, regardless of their own knowledge.The Joy-Pi is prepared, thanks to the system image immediately ready to use, if the mains adapter is connected.With the integrated in the lid 7 inch touch display one can use the Raspberry Pi use and the evaluation of the built-in sensors can be displayed directly. Through the implemented breadboard can further, external sensors and modules or self-constructed circuits connected and used. To the installed sensors include: a light sensor for measuring the brightness, a sound sensor in order to detect sounds, a motion sensor, an ultrasonic sensor for measurement of distances, a tilt sensor, a contact sensor, a temperature and air humidity sensor and an infrared sensor, which allows you to receive commands, for example, an infrared remote control (included). About the modules include: a GPIO LED display, a 16 x 2 LCD module, a 8 x 8 LED matrix, a 7 segment LED display, a buzzer, a relay, a buttons matrix, independent keys, a RFID module, a 5V step motor, a servo motor, 7-inch touch display and a camera that is installed above the display in the lid. Once learned, as these sensors and modules work, there are almost unlimited possibilities the example programs to expand and the individual components in your own programs to combine. You can, for example, the LEDs with the motion sensor and the light sensor combine the LEDs turn on, as soon as a motion is detected in the dark. Or you can use the buttons the pitch of the buzzers influence and is thus a kind of small piano. No limits are set to your imagination. And if you just do not want to make experiments with the case, you can use it as a small laptop use and a keyboard and mouse via USB or Bluetooth to the Raspberry Pi.For this purpose, it is also a small keyboard included, which BT is activated and also a mouse control with has implemented.The following lessons will be treated in the instructions:Use the buzzers for warning tones or notifications Buzzer control with input of the buttons As a relay works and how it controls Send a vibration signal with the vibration module Noise with the sound sensor detection Measure the brightness with the light sensor Measuring the room temperature and the air humidity Movements with the motion sensor detection Distances with the ultrasound sensor measure Control of the LCD displays Reading and writing of RFID cards with RFID module Step motor and step movements Control servo motors via the servo interfaces Control of the 8 x 8 LED matrix Control of the 7-Segment Displays Contact with the contact sensor detection Inclinations with the inclination sensor detection Use and control of the button matrix Taxes and use of the IR sensor Create your own custom switching with the breadboard Photography with the Raspberry Pi-Kamera This text is machine translated.... More