Hague K2WS Junior Jib with Stand

The Hague K2WS Junior Jib with Stand is a boom device that allows attachment of a video camera or DSLR camera (under 3kg in weight) on one end, and a counterweight and camera controls on the other. When mounted to the stand it allows the camera to grab high-angle shots from up to 2.3m and be moved vertically, horizontally, or a combination of the two. The stand has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm.

Hague K2WS Junior Jib with Stand

• Camera attaches directly to the jib arm's camera plate
• Jib fastens to the camera 1/4" screw of any sturdy tripod or onto the 3/8" stud
• Variable tilt control with lock, enables you to tilt the camera 90 degrees
• There is an attachable counterbalance arm complete with weight, plus an adjustable fine trim weight
• Camera can be set in any position, so you can have the camera pointing directly downwards or upwards creating some very unusual shots
• New design has a much greater vertical crane movement, which means the camera can go from ground level to over 7ft.6" (2.3m) high
• You can pan the jib arm 360 degrees
• Includes jib lock, should you require to leave the camera at a set height

Specifications:

• Supports up to 3kg
• Vertical crane movement 2.3m
• Pan Radius 126cm
• Transit Size 144cm x 15cm x 12cm
• Weight 3.5kg
• Fits to any sturdy tripod

The column can be locked at the required height and there is a safety pin to prevent the column slipping. It is ideal if you do not have a suitable sturdy tripod to mount the jib on.

Your camera attaches directly to the jib arm's camera plate and is secured with the thumb screw supplied. There is an attachable counterbalance arm complete with weights, plus an adjustable fine trim weight.

The jib has a variable tilt control with lock, which enables you to tilt the camera 90 degrees and the camera can be set in any position, so you can have the camcorder pointing directly downwards or upwards creating some very unusual shots. The new design has a much greater vertical crane movement, which means the camera can go from ground level to over 7ft.6" (2.3m) high and you can pan the jib arm 360 degrees. There is also a jib lock, should you require to leave the camera at a set height.