Miller CompassX CX10 3752 Sprinter II S-St Tripod Alloy Tripod
The Miller CompassX CX10 Sprinter II 1-Stage alloy tripod offers premium support and counter-balance options in a lightweight, professional package. Combining the 1576 Sprinter II tripod and CX10 fluid video head, users can comfortably use camera rigs that weigh up to 12kg, making it ideal for professional and broadcast usage, where larger cameras with expansive rigs are required. More
Finance options available
The Miller CompassX CX10 Sprinter II 1-Stage alloy tripod offers premium support and counter-balance options in a lightweight, professional package. Combining the 1576 Sprinter II tripod and CX10 fluid video head, users can comfortably use camera rigs that weigh up to 12kg, making it ideal for professional and broadcast usage, where larger cameras with expansive rigs are required.
Key Features: Miller CompassX CX10 3752 Sprinter II 2-Stage CF Tripod
- Ideal for professional and broadcast use: This tripod offers reliable stability for users with high-capacity tripod needs. Capable of holding up to 12kg the CompassX CX10 Sprinter II tripod is ideally suited to professional and broadcast use, where camera rigs are often far heavier due to the accessories attached to the camera
- Lightweight frame: The tripod's alloy frame keeps its weight under 7.5kg with the head attached, making it almost half the weight of other tripods with similar maximum payloads, and offering an incredible stiffness to weight ratio
- CB Plus™ counterbalance technology: The CX10 head features Miller's innovative CB Plus counterbalance technology, allowing users to precisely configure the balance of their rigs. With 16 positions of counterbalance to choose from, there's a setting for every camera rig configuration
- Premium fluid pan and tilt drag controls: The CX10 head features 5+0 selectable positions of fluid pan and tilt drag control, which is adjustable via a radial ring on the ball to the bottom of the head
IBC Show 2017 - Miller CompassX Fluid Head Series
Additional features: CX10 Fluid Head
- Ergonomically located CB Plus switch
- Illuminated bubble level
- Side mounting point for viewfinders
- 60mm balance travel camera plate with ¼" + pin, 1/4" and 3/8" screws
Additional features: Sprinter II CF Tripod
- 100mm alloy bowl
- In-line carry handle
- High-speed independent 2-stage dual leg locks
- Integrated transport clips
- Integrated stainless steel spikes
Specifications:
- Payload range: 0-12kg
- Weight: 7.1kg
- Height range: 82.3 x 158.3cm
- Transport length: 103cm
- Counterbalance positions: 16 (15+0)
- Pan tilt drag:5 selectable fluid drag positions
- Pan tilt locks:Positive lock calliper brake system
- Tilt range: +90 / -75°
- Pan range: 360°
- Camera platform Quick release / side load camera plate
- Sliding range: 60mm
- Mounting base: 100mm ball levelling
- Height above bowl: 150mm
- Illuminated controls: Bubble level
- Pan handle: Fixed 390mm
- Temperature range: -40~+65°C
- Leg extension: 2-stage
- Leg material: Carbon fibre
What's in the box:
- CX10 fluid head (1096)
- Sprinter II 2-stage tripod - alloy (1589)
- Mid-level spreader (993)
- Rubber feet - set of 3 (475)
- Pan handle - fixed with clamp (679)
- ArrowX soft case - 1-stage (3500)
Product Specification
| Closed Length [cm] | 99.3 |
| Colour | Black |
| Features | Spirit Level, Spreader Block, Carry Case |
| Included Accessories | CX10 fluid head (1096), Sprinter II 1-stage alloy tripod (1589), Mid-level spreader (993), Pan handle - fixed with clamp (679), Rubber feet - set of 3 (475), Arrow softcase 1-stage (3500) |
| Is Good For | Video |
| Leg Sections | 1 |
| Max Height [cm] | 158.3 |
| Max Load [g] | 12000 |
| Min Height [cm] | 82.3 |
| Primary Material | Alloy |
| Weight [g] | 6800.00 |
| With Head | Yes |
| Manufacturers Link | Miller |